
New Sinks and Bench Plumbing
From a like-for-like swap to a full re-plumb under the bench:
Taps run all day and hoses sit under pressure behind every machine, because the kitchen and the laundry do more work than any other rooms in a home. If you need a kitchen plumber in Bowen Hills, the team at Bowen Hills Same Day Plumbing handles both rooms end to end. Every job is done by a licensed plumber.
If we're late, $100 comes off your bill

We're available 24/7, with no extra charge for nights, weekends or public holidays. For the full run of urgent and everyday work, start on our Bowen Hills page.

Kitchen and laundry plumbing means the supply pipes feeding the sink, dishwasher, machine and trough, the waste lines taking the water away, and every appliance connection. Fresh water arrives through hot and cold supply pipes, and used water leaves through a trap.
Under a standard sink, the hot and cold lines feed the tap through their own small valves. The waste line drops from the basket waste, past the trap, into the pipe that leaves the building.
Every fixture keeps a trap, and the water sitting in the trap's bend is what stops sewer gas reaching the room. In the laundry, the same pattern repeats with the trough, the wall taps that fill the machine, and the drain that empties it.
All of it ends in the private sanitary drain, the buried line linking every fixture in the building to the sewer connection. Your sink and your toilet share that one drain, each through its own trap.
The few house drains that predate the towers are earthenware, and joints that settled into old fill are where kitchen waste lines start to weep. A slow sink on one of the pre-1940 lots can have its cause well downstream of the trap. For what goes into a new sink, our kitchen sink installation page carries the detail.

An isolation valve closes the water to one fixture and leaves the rest of the home running, and every machine here has its own:
a small valve on each supply line under the bench.
a valve or wall tap on the supply, so a hose can be changed with the kitchen still in use.
the taps on the wall beside the unit.
the stop tap at the water meter, which closes when turned clockwise.
Reach for the meter tap only when nothing smaller works, and check first that no appliance, the hot water system included, depends on the supply.
Towers here were fitted out in single programs, so one valve model can sit on every level of a building. When one seizes with age, its twins a floor up and a floor down are rarely far behind.
In a unit near Bowen Bridge Road, knowing where your own stop valve sits turns a burst appliance hose into a quarter-turn fix, not a flood. For the braided hoses themselves, see flexi hose replacement.

Queensland leaves a sliver of this work unregulated: anyone with the know-how may renew a tap washer or jumper valve, or swap the cartridge in a home water filter. The finished job still has to comply with the standards.
Everything past that short list needs a licence. Fixing or swapping a kitchen or laundry fixture or fitting is minor work: a QBCC licensee handles it, without a permit or compliance form.
With so many rentals here, the licence question comes up on most kitchen quotes, usually from an owner checking a tenant's request. The rules protect the building and the people in it, and licensed work keeps your paperwork clean if you ever sell.

Notifiable work is plumbing done in a home that already stands. Council issues no permit for it, but the plumber sends a Form 4 to the QBCC once the job is finished, and a kitchen renovation sits inside the category.
The form reaches the QBCC inside 10 business days of completion. A new sink, or an old one shifted along the wall, is the same category, and your copy comes with it. If the copy goes missing, the QBCC can send a duplicate.
Units carry one wrinkle: in a block on a combined drain, an added fixture needs a council permit, so raise the layout with us before you commit. Plenty of unit owners here answer to a body corporate, and a scheme often wants sight of the Form 4 before work starts.
From a walk-up off Mayne Road to the newest tower, both rooms break down into a few clear job types, all covered on pages of their own below. Bowen Hills Same Day Plumbing covers them all.

From a like-for-like swap to a full re-plumb under the bench:

Hook-ups, hoses and tracing the ones that hide:

The three property types we see most weeks:
$0 call-out fees, available 24/7, and same-day where we can.

Call (07) 3523 7172 or send the form with a few details about the problem in Bowen Hills. A clear description helps us bring the right parts.

We test the supply and waste under the sink or behind the machine, isolate the fault, and talk through the fix before anyone picks up a tool.

You get a fixed quote before any work starts, with flat-rate pricing and no hidden fees. Nothing goes ahead until you say yes.

Pay by card or EFTPOS on site once the job's done, or ask about Fix now, pay later.

There are $0 call-out fees on every Bowen Hills job, with no extra fee for nights, weekends or public holidays.

A fixed quote before any work starts means flat-rate pricing and no hidden fees on your invoice.
Our Fix-It-or-It's-Free guarantee covers you (T&Cs apply), labour has a lifetime labour warranty, and if we're late, $100 comes off your bill.
QBCC No: 15024607 covers our licensed plumbing and gasfitting. Every job is done by a licensed plumber, and we're licensed and insured.

Bowen Hills Same Day Plumbing is available 7 days a week, and same-day where we can.
Ring (07) 3523 7172 and tell us what's wrong. You get $0 call-out fees, a fixed quote before any work starts and same-day where we can, 7 days a week.
Current offers:
T&Cs apply. Mention this offer when booking.
Yes, moving a fixture is notifiable work, so a licensed plumber handles the move and sends a Form 4 to the QBCC, with a copy for your records.
At a joint. Leaks in these rooms begin where two parts meet: the waste joints under the sink or trough, the base of the tap, the supply connections, or an appliance hose. Our leak detection page covers tracing a hidden one.
You do, if the pipe feeds only your lot and stays inside its boundaries without sitting in a shared wall. A pipe serving more than one lot belongs to the body corporate, so faults on a shared line go to the scheme.
Cost turns on whether fixtures stay put or shift, whether supply or waste points go in, how easily we reach the pipework, and the fittings you choose. You get a fixed quote once we've seen the job, and no hidden fees after that.
Yes, every job carries $0 call-out fees, and there's no extra charge for nights, weekends or public holidays.
Yes, our labour carries a lifetime labour warranty, and our Fix-It-or-It's-Free guarantee covers you (T&Cs apply).